Kastom ID Kad: Ol Samting, RFID & Bulk Oda Gaid
Jun 30, 2026
Larim wanpela toksave
Ol Kastom ID Kad: Hau long Disainim, makim ol stretpela samting na enkoding, na oda long planti
Wanpela kastom ID kat em i wanpela kredit-kad-sais kredensel (ISO/IEC 7810 ID-1 / CR80 fomat, 85.6 mm × 53.98 mm) we ol i prinim wantaim ol aidentiti ditel bilong wanpela man na, long planti ol nupela diploimen, wanpela embedded RFID, NFCD, smart-chid, o smart kontrol. Sapos yu laik makim gutpela kad, yu mas mekim tripela disisen:samting na tikpela(hamas taim em i mas stap), olteknoloji bilong enkoding(wanem ol rida na sekyuriti level sistem bilong yu i nidim), naprinim na pinisim(em i luk olsem wanem na em i hat long wokim). Prais i save kamap long namba bilong ol samting, na bihain long wanem kain 'chip' na pinis bilong en.
Dispela gaid i wokabaut long olgeta disisen long oda yu mekim: makim wanpela kad long yus kes, redim ol artwok we i redi long prinim, makim wanpela samting, makim wanpela rot bilong prinim, makim wanpela enkoding teknoloji long ol rida bilong yu, kliagut long bikpela prais, na putim ol kad we i no gat hevi long sait bilong kompatibiliti.
Wanem Em Kastom ID Kad, na Hau Yu Save Makim Gutpela ID Kad?
Ol kastom ID kat i no moa olsem ol poto betj tasol. Ol i save wok olsem ol 'access-control credentials, ol data carriers, na ol anti-tokens we i save go insait long HR na sekyuriti sistem. Long dispela as, "stretpela" kad i no save kamap olsem wanpela prodak tasol - em i wanpela kombinesen bilong ol samting, 'chip', na 'finishing' we i wankain olsem envairomen we em bai stap long en.
Yusim 'matrix' aninit olsem wanpela stating poin. Em i makim ol 'deployment' we i save kamap planti taim long wanpela gutpela 'default specification'. Sapos yu no klia yet sapos yu nidim wanpela simpol ID kat o wanpela 'chip-based IC kad, eksplener bilong mipela longhau long makim namel long wanpela IC kat na wanpela ID kadi karamapim ol 'trade-offs.
| Yusim kes | Samting / tikpela | Tipikel enkoding | Ol samting we i bikpela samting |
|---|---|---|---|
| Bej bilong wokman bilong opis | 30 mil PVC | 13.56 MHz (MIFARE) o 125 kHz prox | Poto, dipatmen, deili ekses |
| Ol wokman bilong haus sik | 30 mil PVC o PVC/PET komposit | MIFARE DESFire (ol seif ples) | Kwikpela piksa ID, 'zone access', 'lamination' we inap long klinim |
| Yunivesiti / sumatin | 30 mil PVC | Tupela-frikwensi o planti-aplikesen | Laibreri, ples kaikai, dua i go insait long wanpela kad |
| Fektori / indastriel | 40 mil komposit, anti-skras ovalei | Strongpela LF/UHF o 13.56 MHz | Durability, zone access, shift tracking |
| Visita / kontrakta | 24-30 mil PVC o tromoi stok | Besik prox o taim-limited kredensel | Kala koding, pinis bilong taim bilong prinim, isi long putim aut gen |
| Gavman / bikpela sekyuriti | Komposit wantaim smat sip | Kontek / kontekles smat kad | Cryptographic authentication, laser engraving, tamper evidence |
Gutpela pasin:makim enkodingbipool piksa. Sip na antena i makim we yu ken putim wanpela hul bilong 'punch', hamas tudak poto i ken stap, na sampela taim 'thickness' bilong kad - olsem na sapos yu lokim 'credential' pastaim yu no inap prinim gen bihain.
ID Kad Disain Templet na Print-Redi Artwok Spesifikasen
Planti ol 'production delay' i no gat wok long 'printing'. Ol i kam long ol piksa we ol i bin putim rong - rong kala mod, low-resolusen logo, o teks i sindaun long hap bilong katim. Sapos yu stretim fail long namba wan taim, dispela em i bikpela samting tru long sevim taim insait long wanpela kastom kad projek.
Ol fomat bilong fail
Saplaim ol print-redi vektor fail long wanem hap yu inap: PDF/X bilong prodaksen, o AI/EPS bilong sos disain. Hai-resolusen PNG o JPEG em i orait tasol long ol simpol, piksa-lait layout. Ol 'logo' i mas kamap olsem 'vector' (SVG/AI) na i no olsem ol 'screenshot'.
Ol mak, 'bleed', na 'safe zone'
Ol standet ID kat i bihainim ISO/IEC 7810 ID-1 (CR80) standet: wanpela 85.6 mm × 53.98 mm wantaim 0.76 mm tiknes na ol kona i raunpela - wankain mak olsem wanpela benk kad, na dispela i as na em i fit long olgeta standet rida slot, walet, na walet holda. Putim 3 mm bilong blut long olgeta sait, na holim ol bikpela teks na poto i stap 2-3 mm insait long arere bilong 'trim'.
Resolusen na kala
Yusim 300 DPI na wokim ol fail long CMYK, i no RGB. Ol RGB fail i luk stret long skrin tasol ol i save senis taim ol i prinim, na dispela em i wanpela as bilong ol komplen bilong kala- i wankain. Makim wanpela Pantone refrens sapos kala bilong bren i bikpela samting.
Ol fil na ol lo bilong poto yu mas i gat
Planti kad i gat ful nem bilong lo, wanpela wokman o sumatin ID namba, wanpela paspot-stail poto, dipatmen o wok, wanpela deit bilong pinis, na planti taim wanpela 'barcode' o QR kod. Ol poto i mas yusim wanpela 'neutral light background', pes i stap namel wantaim solda we i stap ples klia, nogat ol filta, na ol poto i mas gat bikpela 'contrast' - low-kontras na ol poto i no ken lukluk gut aninit long ol 'door-reader cameras na long liklik lait.
Templet gutpela samting we planti saplaia i save lusim
Wanpela gutpela ditel we i sevim ol 'revision cycles': redi-long-yusim ol CR80 templet fail wantaim mak bilong 'bleed', 'safe zone', 'pre-set 'punch-hole positions', na - bilong ol 'chip card' - wanpela antena we i gat klia mak "nogat {{{}}} nogat 'punch zone print". Ol 'role-specific templates (visitor, contractor, employee) i save mekim ol tok orait i kamap hariap bikos ol riviua i save lukim laspela 'layout' hariap.
Long praktis, ol bikpela rong bilong artwok em long putim wanpela hul antap long RFID antena lup (we i save kilim 'chip'), salim i go aut long RGB, yusim wanpela 'logo' we i no gat planti 'resolution' long prinim gut, na makim wanpela poto we i tudak tumas long ol rida kamera i no inap long ritim.
Yu mas makim wanem kain ID Kad: PVC, PET-G, Composite, o Eco-Friendly?
Seleksen bilong ol samting i save makim hamas taim wanpela kad i ken stap laip na hau em i save mekim wok long taim bilong hat, sanlait, o taim yu swipim planti taim. Tebol aninit i skelim ol komon opsen; makim long envairomen pastaim na yunit kos namba tu.
| Meteriel | Durability | Heat resistans | Kwaliti bilong prinim | Chip-prenli | Kost we i wankain | Gutpela long |
|---|---|---|---|---|---|---|
| PVC | Gutpela | I no bikpela | Nambawan | Yes | Daunbilo | Ol 'badge' na 'access card' bilong olgeta de |
| PET-G | Gutpela+ | Hai | Gutpela tru | Yes | Midium | Hat eksposesen, hevi laminesen, indastrial yusim |
| Komposit (PVC/PET) | Nambawan | Hai | Nambawan | Yes | Antap moa | Ol bikpela -yus kad, laser engraving, smat kat |
| PVC ol i yusim gen | Gutpela | I no bikpela | Gutpela | Yes | Midium | Ol sastenebiliti program i nidim standet pefomens |
| PLA / biodegradable | Daunim mak | Daunbilo | I stret | I save senis | Namel-Hai | Sot-laip o singel-ivent kad |
| Pepa / Tyvek (sotpela taim tasol) | Daunbilo | Daunbilo | I stret | Long ol 'disposable tags' | Daunbilo tru | Ol 'visitor' na 'event badge' |
PVC em i 'default' long wanpela as: em i save prinim gut tru, em i save karamapim RFID inlay gut, na em i no gat bikpela pe. Go antap long PET-G o komposit taim kad i bungim hat, strongpela laminesen, o hevi hanling long olgeta de - na taim yu plen long laser-engrave, we komposit i mas stap. Long ol 'chip card' stret, lukluk longPVC RFID kadolsem wanpela 'baseline refrens' bilong konstraksen na 'thickness'.
Tiknes
| Tiknes | Pilim | Gutpela yusim |
|---|---|---|
| 24 mil | Fleksibol, i no strong tumas | Sotpela taim o yusim liklik taim tasol; i no gutpela long 'swipe' akses long olgeta de |
| 30 mil | Standet strong | Profesenel difolt; i wok wantaim planti printa, holda, na rida |
| 40 mil | Hevi-diuti | Ol kad bilong indastriel, ausait, lanyard-olpela na ol i save holim planti taim; pastaim sekim sapos holda na printa i wok gut wantaim |
Laminesen na ol koting
Wanpela 'gloss finish' i mekim ol kala i kamap ples klia; wanpela 'matte finish' i save daunim lait na helpim ol 'optical scanner'. UV koting i save daunim 'fading' ausait, wanpela 'anti-scratch overlay i save mekim laipspan bilong ol kad we ol i holim planti, na wanpela 'holographic film' i save putim wanpela 'visible anti-' giaman 'layer' we i hat long wokim wankain.
Ol opsen we i gutpela long envairomen - wantaim ol stretpela tred-of
Ol PVC we ol i yusim gen, ol PVC-fri komposit, na ol stok we i gat PLA- i stap. Gutpela tok em i no dispela tok "eco-friendly" tasol em i as bilong en: 'recyclability', PVC-fri konstraksen, 'recycled content', o ol setifikesen olsem RoHS o REACH kompliens. Tingim liklik 'durability' o 'cost trade-off long senis - konfemim wanem setifikesen i aplaim pastaim long yu mekim wanpela 'sustainability claim' long wanpela tenda.
Laipspan i dipen long hamas taim yu 'swipe', sapos kad i stap insait long wanpela 'protective holder', sapos yu kisim ol kemikel na UV, na hamas taim yu save tanim. Olsem ol 'rough field' estimet: 2-5 yia insait long wanpela ofis, 1-3 yia long 'high-frequency swipe access, na 1-2 yia long ausait eksposesen dipen long koting. Lukim ol dispela olsem ol 'planing ranges', na i no olsem ol 'garanti'.
Ol rot bilong prinim ID kad, ol pinis, na ol data we i save senis senis
Rot bilong prinim i save senisim kwaliti bilong poto, strong bilong en, pe bilong wan wan kad, na hamas isi olgeta wan wan kad i ken karim ol narakain data.
| Rot bilong mekim wok | Strong | Bilong wanem / wanem taim long yusim |
|---|---|---|
| Dae-sublimasen | Poto-kwaliti, gutpela mak | Em i gutpela long ol wokman na sumatin kad; ol kain kain 'retransfer' i save karamapim ol 'smart-card chips gut tru. Em i gutpela long ol liklik-i go long-namel lain |
| UV / inkjet | Em i stap longpela taim long stok we i gat koting, isi long senisim ol data | Em i gutpela long ol sotpela ran na ol kad we wanwan i nidim narapela narapela data; i save oraitim strong na i no save skrapim |
| Offset | Lost unit cost long scale | Em i gutpela long ol bikpela volium bilong ol wankain artwok; i no stret long wanwan -kad variebol data, we ol i putim long narapela step bihain |
Ol opsen bilong pinisim wok i stap antap long wok bilong prinim: 'gloss' o 'matte lamination', 'spot UV highlighting', 'gold/silver foil stamping', 'holographic overlays', na 'microtext' bilong stopim - giaman samting. Long ol faktori program, wanpela insait-haussevis bilong prinim na mekim ol smat kat i kamap bilong yu yeti save holim 'printing' na 'encoding' i stap wankain insait long wanpela wokflo.
Printim ol data we i save senis
Ol data we i save senis em i samting we i save tanim wanpela jenerik kad i kamap wanpela kredensel: wanpela yunik nem, ID namba, QR o barkod, serial namba, na ol rol-spesifik fil, we planti taim ol i save kisim long wanpela CSV. Dispela em i bikpela samting long pasim wanwan fisikel kad long wanpela HR rekot o kisim -kontrol databes. Sapos yu tingting long prinim olgeta samting long fran o mekim 'blank stock' i kamap olsem yu laikim, lukimol blank kat na ol kad we ol i bin prinim pinis. Ol program we i laik prinim ol kad long laik bilong ol i save stat longol NFC blank kat we yu ken prinim.
RFID, NFC, Magnetic Stripe, o Smart Card: Wanem Encoding i Fitim Sistem Bilong Yu?
Dispela em i disisen we planti taim i no save kamap gut, long wanem, planti taim ol i save ting olsem "moa moden" em i "moa seif." Em i no isi - sekyuriti i dipen long spesifik 'chip' na 'cryptography' bilong en, i no long 'frequency band'. Tebol aninit i soim ol gutpela opsen.
| Teknoloji | Bend | Sekuriti | Ritim mak | Kost we i wankain | Gutpela long |
|---|---|---|---|---|---|
| Magnetic stripe (ISO 7811) | Kontek swipe | Daunbilo | Swipim tasol | Daunbilo | Ol sistem bilong bipo, ol ki bilong hotel, pasin bilong stap gut long narapela |
| 125 kHz klostu (EM/TK4100) | LF | Liklik (UID tasol, planti taim ol i ken klonim) | Sampela sentimita | Daunbilo | Simpol dua bilong go insait, ol 'legacy' panel |
| MIFARE Classic 1K | 13.56 MHz | Low-moderate (ol wiknes ol i save long en) | ~cm | Low-med | Jeneral ekses we i no nidim bikpela sekyuriti |
| MIFARE DESFire EV2/EV3 | 13.56 MHz | Bikpela (AES, EAL5+ setifiket) | ~cm | Med-high | Sekyua ekses, transit, multi-aplikesen |
| NFC (NTAG / NDEF) | 13.56 MHz | I save senis long wanwan 'chip' | ~cm | Low-med | Ol toktok long fon, ol link, lait ekses |
| Kontek / kontekles smat kad | Kontek o 13.56 MHz | Nambawan (kriptograf) | Kontek / ~cm | Hai | Gavman, fainens, hai-asurens ID |
Sampela tok klia i gutpela long mekim klia. Wanpela magnetik strip em i no gat bikpela pe tasol em i save putim ol data we yu ken kopim isi tasol; pasin bilong ol hotel long bungim wantaim ol nupela teknoloji i stap insait longolsem wanem ol ki kad bilong hotel i wok. A 125 kHz klostu kadplanti taim em i save brodkastim wanpela UID tasol na em i isi long 'clone', we i orait long ol 'low-risk dua tasol i no long ol 'secure zone'. WANPELAMIFARE Classic 1K kadem i gutpela long olgeta hap tasol i gat ol hevi bilong 'cryptographic'. Long kisim gutpela sekyuriti tru long 13.56 MHz yu laikim DESFire, we sip i gat AES kriptograf na EAL5+ setifikesen - lukim MIFARE DESFire famili bilong NXP long ol samting we i stap aninit. Na "NFC" em i wanpela pasin, i no wanpela sekyuriti level; wanpela NTAG stika na wanpela DESFire kad tupela i NFC, wantaim narapela narapela proteksen. Sapos RFID-na-NFC i no klia yet, toksave bilong mipela longDifrens namel long RFID na NFCna ol bikpela NFC Forum spesifikesen em ol gutpela refrens.
Sekuriti i stap long tripela 'practical tiers'
- Besik:poto + serial namba + QR o barkod. Em i gutpela long ol 'visitor pass' na ol 'low-bej we i no gat bikpela hevi.
- Namel:putim UV ink, wanpela 'holographic overlay', na wanpela MIFARE kredensel. Em i gutpela difolt bilong planti ol koporet na kempas program.
- Hai:wanpela DESFire o kontek smat sip wantaim AES/cryptographic authentication, wantaim laser engraving na wanpela 'tamper-evident overlay. Long sait bilong mani, gavman, na ol 'restricted zones'.
Sekim lista bilong 'compatibility' pastaim long yu putim 'encode'
Bikpela hevi bilong 'deployment' em i no 'print quality' - em i wanpela 'encoding' we ol rida i stap pinis i no inap long ritim. Pastaim long yu odarim ol 'chip card', yu mas sekim:
- Rida frikwensi (125 kHz vs 13.56 MHz) na stretpela 'chip family' em i sapotim.
- Maski panel i ritim tasol UID, o wanpela spesifik sekta / aplikesen fail we i mas gat enkoding.
- Ol ki bilong enkripsen na ol ki-menesmen rikwaemen - na husat i holim ol.
- Dispela 'access-control software bilong yu i sapotim 'chip' yu laik baim.
- Bikpela samting tru: putim na traim wanpela 'sample card' long 'real reader' pastaim long yu givim tok orait long 'full run'.
Hamas Kos bilong ol Kastom ID Kad Long Bulk?
Prais i save kamap pastaim long namba, bihain long kain 'chip', bihain long 'finishing' na ol samting bilong en. Volium logic em i isi - 50 ol kad i gat bikpela pe bilong wanwan yunit bikos setup i bosim, 250 kad i kisim liklik diskaun, na 1,000+ kad i kisim liklik pe bilong wanwan yunit. Samting ol baia i laik save long en emwanemol i wok long baim.
| Kost komponen | Wanem samting i kirapim em |
|---|---|
| Bes kad stok | Samting (PVC vs PET-G vs komposit) na tiknes |
| Setim na stretim | Wanpela-taim long wanwan disain; planti taim ol i ken givim dinau long wanpela bikpela oda |
| Printing | Rot, namba bilong ol kala, wanpela o tupela sait |
| Laminesen / pinisim | UV, anti-scratch, holographic, foil, spot UV - wanwan leia i save putim pe |
| Pe bilong sip | 125 kHz na besik NFC em i no gat bikpela pe; DESFire na ol smat sips i gat bikpela pe moa |
| Encoding / personalization | Ol data we i save senis, poto printing, UID-long-rekod meping, sekta enkoding |
| QC na paket | Ritim tes, kiting, makim ol samting long dipatmen o ples |
| Siping | Rot, ples bilong go long en, brukim o lusim ol sipmen |
Bikpela 'single swing' em i save kamap long 'chip'. Sapos yu lusim wanpela 125 kHz kad na yu go long wanpela 13.56 MHz kredensiel, dispela i senisim tru ol samting bilong yu; skelim insait long125 kHz egensim 13.56 MHz akses-kontrol kredensel kosi soim olsem wanem dispela i kamap. Lukluk long ol hait draiva tu: ol hevi bilong enkoding, strongpela kala matsing, ol sekyuriti samting i gat planti leit, na ol senis long taim bilong 'proofing'.
Prodaksen Wokflo, Proofing, na Turnaround
Wanpela kastom kad oda i save muv long wanpela 'preditable sequence': salim artwok na wanpela data fail (CSV bilong ol data we i save senis), kisim wanpela dijitel PDF pruf, sapos yu laikim, oraitim wanpela 'physical sample', ranim prodaksen, enkodim ol 'chips' we i stret, winim kwaliti inspeksen, na salim.
Pre-prodaksen pruofing seklis
Pastaim long yu tok orait long ran, sekim:
- Speling bilong ol nem, ol taitel, na ol dipatmen fil.
- Poto krop, lait, na kontras.
- Dipatmen o wok kala koding.
- Olgeta 'barcode' na 'QR code' i save skenim stret.
- Dispela wanpela 'sample chip card' i save ritim na enkodim long 'target reader'.
- Punch-hole posisen we i stap klostu long antena.
Turnaround - na wanem ol kondisen tru
Standet prodaksen i save ron long 3-7 bisnis de. 'Rush service' bilong 24-48 aua em i gutpela tasol long ol standet printed kat, long liklik namba, bihain long pruf tok orait pastaim long deli kat-of, na i no gat taim bilong salim na kompleks enkoding. Hevi 'chip encoding' o ol 'layered security features' i save skruim taimlain.
Hau long putim ol kastom ID kat insait long 'access control system' bilong yu
Prodaksen em i hap tasol bilong projek. Diploimen em i we 'compatibility', data, na 'lifecycle management' i makim sapos program i ron gut o nogat. Wanpela klinpela 'rollout' i luk olsem:
Tok klia long kain kad na sekyuriti tier.Konfemim rida na sofwet kompatibiliti wantaim seklis antap.Redim artwok na klinpela data fail.Apruvim wanpela dijitel pruf, bihain wanpela fisikel sempel.Ranim wanpela enkoding tes long wanpela ril rida.Muvim i go long mas prodaksen.Pakim long dipatmen o sait bilong tilim.Aktivim ol kredensiel insait long sistem. ol kad i bagarap, o ol i apdetim.
Redim ol data na poto bilong yu
Long ol 'variable-data na ol 'encoded cards', data fail i save nidim ol kolum bilong wokman/studen ID, ful nem, dipatmen, wok, na 'expiry' - na tu wanpela 'mapping field' sapos yu pasim wanpela 'card UID' long wanpela rekot. Wanbel long wanpela pasin bilong givim nem long ol poto fail (planti taim ID namba), makim husat i save kamapim ol QR/barkod veliu, makim hau ol i save lukautim na putim ol pesonel data, na ritim gut fail pastaim long ol i go long prodaksen. Planti hevi bilong 'encoding' i save kamap long wanpela 'spreadsheet' we i no stret, na i no long 'hardware'.
Rida kompatibiliti na fom fakta
Sapos yu wok long makim o apgredim ol rida, stretim ol 'credential' na 'panel' wantaim na noken baim ol kat pastaim; mak bilong mipelaakses-kontrol RFID ridai soim wanem ol 'frequency' na 'chip family' i gat sapot. Long ol visita, ol iven, o ol ples we i gat wara olsem ol haus sik na ol pul we wanpela kad i no gutpela, wanpela 'wristband' i ken karim wankain 'credential' - lukimRFID hanben opsen.
Riplesmen na laipsaiklon
Wokim polisi pastaim: ol i mas givim bek wanpela kad we i lus na ol i mas rausim olpela 'credential' hariap; wanpela kad we i bagarap ol i save prinim gen na putim gen long -enkod; na sapos yu senisim wok bilong yu, dispela i ken nidim yu long givim bek hap o olgeta samting, dispela i dipen long hau sistem bilong yu i save putim ol tok orait.
Ol aplikesen bilong wol tru
Wankain kad pletfom i save senis long olgeta indastri. Ol opis bilong ol bikpela kampani i save putim wanpela 30 mil PVC kad wantaim wanpela MIFARE kredensiel bilong go insait long dua na go long haus.Ol Yunivesitibungim laibreri, ples kaikai, na rot bilong go insait long wanpela multi-aplikesen o tupela-frikwensi sumatin kad. Ol plent bilong wokim ol samting i nidim 40 mil komposit kad wantaim ol 'anti-scratch overlays bilong 'zone-based access na shift tracking insait long ol doti envairomen. Ol heltke institusen i save bungim ol strongpela wokman kad bilong ol 'restrict zone' wantaim ol kala-kod, taim-limited visita bej we i save pinis hariap.
Ol samting bilong helpim na inapim
Ol kad i no save salim ol yet. Ol samting we ol i save yusim em ol 'lanyard' we ol i wokim o standet, ol 'badge reels' we ol i ken pulim i go bek, ol 'rigid' o 'flexible' PVC holda, na ol 'magnetic clip' o 'pin'. Long ol bikpela program, 'kitting' (kad na 'lanyard' na 'holder'), ol 'batch' o 'split shipments', 'drop-shipment' i go long planti sait, na 'reorder support' olgeta i save daunim wok bilong edministresen long kastoma.
Yu redi long baim ol kastom ID kat?
Long muv hariap, redim wanpela 'vector logo' (SVG o hai-resolusen PNG), wanpela 'user data list' long CSV fomat, kain kad na namba bilong yu, na ol samting yu mas mekim long 'encoding' o 'access-system. Wantaim ol dispela yu ken askim long kisim wanpela kwot na wanpela dijitel pruf, o toktok long wanpela program we i stret long yu longOEM/ODM kastom kad wokimpastaim long yu mekim wanpela ful ran.
FAQ
Wanem fail fomat i gutpela long prinim ID kat?
PDF/X o 'vector formats' (AI/EPS) i save givim gutpela 'print' risal. Givim ol 'logo' olsem ol 'vector' fail na wokim olgeta samting long CMYK long 300 DPI o antap moa.
Wanem samting bilong ID kat i save stap longpela taim?
PVC em i standet na i wok gut long yusim long olgeta de. Long sakim hat, hevi hanling, o laser engraving, PET-G o PVC/PET komposit i save stap longpela taim, long bikpela yunit kos.
Wanem samting i narapela long RFID na NFC kat?
RFID em i bikpela famili bilong ol teknoloji we i no gat kontek; NFC em i wanpela 13.56 MHz sabset we ol i wokim bilong sotpela-renj, fon-pren intareksen. Sekuriti i stap long wanpela 'chip', na i no long 'label' - wanpela NFC kad i ken i stap isi tru o sekyuriti tru bihainim sapos em i yusim NTAG o DESFire 'chip'.
Mi mas makim 125 kHz, MIFARE Classic, o DESFire?
Yusim 125 kHz long isipela, liklik -risk dua akses long ol 'legacy panel'; MIFARE Classic bilong jeneral ekses we i no nidim bikpela sekyuriti; na DESFire EV2/EV3 taim yu nidim AES-greid sekyuriti bilong ol 'restricted zones', 'transit', o ol 'multi-application cards'.
Hau bai mi ken tok olsem ol kad bai wok wantaim ol rida bilong mi?
Mekim rida frikwensi na stretpela sip famili, konfemim sapos em i ritim UID o wanpela enkoded sekta/aplikesen fail, sekim ol enkripsen-ki rikwaemen, na oltaim testim wanpela enkoded sempel kad long ril rida pastaim long ful ran.
Wanem data fail mi nidim long 'variable printing'?
Wanpela CSV wantaim wanpela lain long wanwan man i holim kad, ol kolum bilong ID namba, nem, dipatmen, wok, na taim bilong pinis, wanpela wankain poto-neming konvensen, na agrimen long husat i kamapim ol 'barcode'/QR veliu. Klinpela data i save stopim planti 'encoding errors'.
Wanpela hul bai bagarapim RFID antena?
Em inap, sapos yu putim antap long 'antena loop'. Yusim wanpela templet we i gat mak bilong antena no-punch zone, o makim wanpela slot punch posisen we i kliarim antena.
Prodaksen i save kisim hamas taim?
Planti taim 3-7 wok de. Rush 24-48 aua sevis i save kamap long ol standet printed kad long liklik namba, bihain long pruf i tok orait, na i no gat sipmen na kompleks enkoding.
Mi ken glasim wanpela sempel pastaim long mi wokim olgeta?
Yes. Wanpela dijitel pruf em i standet, na ol i ken wokim wanpela 'physical sample' bilong kisim tok orait - strongpela rekomendesen bilong olgeta 'chip-encoded oda.
Wanem samting i save mekim bikpela samting long prais?
Namba pastaim, bihain kain 'chip' (wanpela gutpela 'chip' olsem DESFire i gat bikpela pe moa long 125 kHz), bihain pinisim na ol samting bilong en.
Ol ID kat we i no bagarapim envairomen i stap?
Yes - ol i yusim gen PVC, ol PVC-fri komposit, na ol stok we i gat PLA-. Askim long stretpela as bilong kleim (recyclability, ricycled content, o RoHS/REACH kompliens) na i no wanpela jenerik "eco" lebol, na tingim olsem bai i gat liklik strong o kost tred-of.
Askim wok painimaut